{"product_id":"dim-zw","title":"DIM-ZW","description":"\u003cdiv class=\"vw-pdp\"\u003e\n\u003cdiv class=\"vw-tabs\"\u003e\n\u003cinput class=\"vw-tabinput\" type=\"radio\" name=\"vw-tab\" id=\"vw-t1\" checked\u003e \u003cinput class=\"vw-tabinput\" type=\"radio\" name=\"vw-tab\" id=\"vw-t2\"\u003e \u003cinput class=\"vw-tabinput\" type=\"radio\" name=\"vw-tab\" id=\"vw-t3\"\u003e\n\u003cdiv class=\"vw-tabbar\" role=\"tablist\" aria-label=\"Product information\"\u003e\n\u003clabel class=\"vw-tab\" for=\"vw-t1\"\u003eDescription\u003c\/label\u003e \u003clabel class=\"vw-tab\" for=\"vw-t2\"\u003eSpecifications\u003c\/label\u003e \u003clabel class=\"vw-tab\" for=\"vw-t3\"\u003eCompatible Controllers\u003c\/label\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vw-panel vw-p1\"\u003e\n\u003cp\u003eThe Versa Wireless DIM-ZW is a Z-Wave 800 Series Long Range \u003cstrong\u003ein-wall dimmer switch\u003c\/strong\u003e - a wired smart dimmer that replaces a standard single-pole or 3-way wall switch and turns any hardwired lighting circuit into a dimmable, scene-capable one. Z-Wave Long Range reaches up to \u003ca href=\"https:\/\/versawireless.com\/blogs\/insight\/z-wave-800-long-range-explained\" style=\"color: #1565c0;\"\u003e1,300 ft line-of-sight\u003c\/a\u003e direct to the controller, holding a connection from far corners, basements, and detached structures without leaning on the mesh.\u003c\/p\u003e\n\u003cp\u003eIt handles real lighting loads - \u003cstrong\u003e600W incandescent or halogen, or 300W of dimmable LED or CFL\u003c\/strong\u003e - with a true multilevel dimming curve, soft start, and adjustable ramp rates for both on\/off and dimming. As an LED dimmer it trims at both ends: minimum and maximum brightness are settable from the hub (parameters 11 and 12) or right at the wall by pressing the bottom paddle 5x for minimum and the top paddle 5x for maximum, so a fixture that flickers or buzzes at the low end can be tuned without pulling the device out of the box.\u003c\/p\u003e\n\u003cp\u003eCentral Scene is supported on a 2-tap of either paddle, giving two scene triggers that fire hub automations without switching the load. Pairing is SmartStart - scan the DSK QR code on the front of the device - and a built-in always-on repeater strengthens the Z-Wave mesh for every mains-powered node on the network. On a classic mesh network, association group 2 also sends a Basic Set to as many as 5 nodes on a local paddle press, for direct device-to-device control. A node included via Z-Wave Long Range has one neighbor, the controller, so on LR that same behavior is built as a hub automation triggered by the paddle rather than as an association - see \u003ca href=\"https:\/\/versawireless.com\/blogs\/insight\/z-wave-configuration-parameters-association-groups\" style=\"color: #1565c0;\"\u003eZ-Wave configuration parameters and association groups\u003c\/a\u003e. A neutral is required, and in a 3-way install the DIM-ZW goes in the box with direct power while the companion stays a standard mechanical 3-way switch. The installation manual lists all nine configuration parameters.\u003c\/p\u003e\n\u003cp\u003eLong Range and classic mesh are two radio modes on the same device. The DIM-ZW reaches up to 1,300 ft direct-to-controller on Long Range, and about 330 ft (100 m) per hop on classic mesh. Z-Wave Long Range devices transmit at up to +20 dBm against -1 dBm for classic Z-Wave; Z-Wave developer Eric Ryherd puts ZWLR at \u003ca href=\"https:\/\/drzwave.blog\/2022\/11\/23\/how-far-does-z-wave-long-range-reach\/\" rel=\"nofollow noopener\" style=\"color: #1565c0;\" target=\"_blank\"\u003eover double the range of classic Z-Wave\u003c\/a\u003e at +14 dBm. The DIM-ZW is \u003ca href=\"https:\/\/z-wavealliance.org\/\" rel=\"nofollow noopener\" style=\"color: #1565c0;\" target=\"_blank\"\u003eZ-Wave certified\u003c\/a\u003e and \u003ca href=\"https:\/\/www.intertek.com\/product-certification-marks\/etl\/\" rel=\"nofollow noopener\" style=\"color: #1565c0;\" target=\"_blank\"\u003eETL Listed by Intertek\u003c\/a\u003e to UL 60730-1:2016.\u003c\/p\u003e\n\u003ch2 class=\"vw-kf\" style=\"font-size: 17px; line-height: 24px; font-weight: 600; margin: 26px 0 8px; color: #081f3f !important;\"\u003eKey features\u003c\/h2\u003e\n\u003cul class=\"vw-list\"\u003e\n\u003cli\u003eZ-Wave 800 Series with Long Range - up to 1,300 ft direct-to-controller line of sight\u003c\/li\u003e\n\u003cli\u003eIn-wall paddle dimmer switch for single-pole or 3-way lighting circuits - neutral required\u003c\/li\u003e\n\u003cli\u003e600W incandescent\/halogen (derate to 500W 2-gang, 400W 3-gang) and 300W dimmable LED\/CFL\u003c\/li\u003e\n\u003cli\u003eWorks as an LED dimmer switch - minimum and maximum brightness adjust from the hub (parameters 11 and 12) or at the paddle, tuning out low-end flicker and buzz\u003c\/li\u003e\n\u003cli\u003eAdjustable ramp rates - separate 1-10 second fades for on\/off and for dimming, with soft start\u003c\/li\u003e\n\u003cli\u003eCentral Scene support - 2-tap top or bottom paddle fires Scene 1 or Scene 2\u003c\/li\u003e\n\u003cli\u003eSmartStart pairing - scan the DSK QR code on the front of the device; S2 encrypted inclusion\u003c\/li\u003e\n\u003cli\u003eBuilt-in always-on repeater - strengthens the Z-Wave mesh for every mains-powered node\u003c\/li\u003e\n\u003cli\u003eAssociation group 2 sends Basic Set ON\/OFF to up to 5 nodes on a classic mesh network\u003c\/li\u003e\n\u003cli\u003eBackward compatible with Z-Wave 500, 700, and Plus networks\u003c\/li\u003e\n\u003cli\u003ePower-fail restore - returns to last state, on, or off after an outage (parameter 8)\u003c\/li\u003e\n\u003cli\u003eAir-gap pull tab at the bottom of the paddle cuts power locally for safe bulb changes\u003c\/li\u003e\n\u003cli\u003eAuto turn-off and auto turn-on timers, 1-65535 minutes (parameters 4 and 6)\u003c\/li\u003e\n\u003cli\u003eWorks with all Z-Wave certified controllers - officially listed: 2GIG EDGE, Qolsys IQ, SmartThings, Hubitat, Home Assistant\u003c\/li\u003e\n\u003cli\u003eIndoor, US 125VAC | FCC Part 15 Class B | ETL Listed to UL 60730-1:2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vw-panel vw-p2\"\u003e\n\u003csection class=\"versa-spec-table\"\u003e\n\u003ch2 id=\"dimzw-specs-heading\" style=\"font-size: 19px; line-height: 26px; font-weight: 600; margin: 0 0 14px; color: #081f3f !important;\"\u003eDIM-ZW Specifications\u003c\/h2\u003e\n\u003cp class=\"versa-spec-sub\"\u003eZ-Wave 800 LR In-Wall Paddle Dimmer Switch\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth class=\"versa-group\" colspan=\"2\" style=\"background-color: #0d1d41 !important; color: #ffffff !important;\"\u003eWireless \u0026amp; Z-Wave\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eProtocol\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003e\u003cstrong\u003eZ-Wave 800 Series with Long Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eFrequency\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003e908.42 \/ 916 MHz mesh | 912 \/ 920 MHz Long Range (US)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eRange\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003e\n\u003cstrong\u003eUp to 1,300 ft\u003c\/strong\u003e direct-to-controller line of sight (Long Range) | about 330 ft (100 m) per hop (classic mesh)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eSignal Repeater\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eBuilt-in - strengthens mesh for every non-battery Z-Wave node\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eController Compatibility\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eAll Z-Wave certified controllers - officially listed: 2GIG EDGE, Qolsys IQ, SmartThings, Hubitat, Home Assistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eBackward Compatibility\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eOperates with Z-Wave 500, 700, and Plus networks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eDevice IDs\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eManufacturer 0x0464 | Product Type 0xEE00 | Product ID 0xEE02 | Installer Icon 0x0700 | User Icon 0x0604\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eFirmware\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eV1.0 - SDK 7.24.1, Z-Wave version 8.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"versa-group\" colspan=\"2\" style=\"background-color: #0d1d41 !important; color: #ffffff !important;\"\u003ePairing \u0026amp; Security\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eSmartStart\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eYes - scan the DSK QR code on the front of the device; auto-added within 10 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eSecurity\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eS2 - encrypted Z-Wave Plus pairing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eManual Inclusion\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003ePress the TOP paddle 3x quickly - blue LED flashes, green 2 s = success\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eManual Exclusion\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003ePress the BOTTOM paddle 3x quickly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eAssociation Group 1\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eLifeline - up to 5 nodes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eAssociation Group 2\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eSingle Press - up to 5 nodes, sends Basic Set ON\/OFF on a local paddle press. Direct device-to-device association runs on a classic mesh network; a node included via Long Range has one neighbor, the Primary Controller, so on LR the same behavior is built as a hub automation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eFactory Reset\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003ePress the BOTTOM paddle twice quickly, then hold a third press for 10 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"versa-group\" colspan=\"2\" style=\"background-color: #0d1d41 !important; color: #ffffff !important;\"\u003ePower \u0026amp; Load\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eInput\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003e125VAC, 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eLoad Rating (Incandescent)\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003e\n\u003cstrong\u003e600W\u003c\/strong\u003e incandescent\/halogen - ganged installs derate to 500W (2-gang) or 400W (3-gang)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eLoad Rating (CFL \/ LED)\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003e\n\u003cstrong\u003e300W\u003c\/strong\u003e dimmable CFL or LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eLoad Types\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eLighting loads only - not for fans, receptacles, tube\/fluorescent, or transformer-supplied fixtures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eWiring\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eSingle-pole or 3-way | \u003cstrong\u003eneutral required\u003c\/strong\u003e | 14 AWG copper conductors only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eWall Box\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eSingle-gang, 2-3\/4 in. minimum depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003e3-Way Companion\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eStandard mechanical 3-way switch - not a second smart switch, dimmer, or add-on; DIM-ZW must be the device with direct connection to power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eAir Gap\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003ePull tab at the bottom of the paddle cuts power to the dimmer for bulb changes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003ePower-Fail Restore\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eYes - last state (default), on, or off, set by parameter 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"versa-group\" colspan=\"2\" style=\"background-color: #0d1d41 !important; color: #ffffff !important;\"\u003eFunction \u0026amp; Indicators\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eDevice Type\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eIn-wall dimmer switch (on\/off + multilevel dimming), soft start\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003ePaddle Control\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eTop 1x = ON, bottom 1x = OFF (parameter 1) | press and hold to brighten (top) or dim (bottom) | top 8x cycles parameter 1, bottom 8x cycles parameter 8, bottom 10x cycles parameter 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eCentral Scene\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eTop paddle 2x = Scene 1 | bottom paddle 2x = Scene 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eBrightness Range\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eMinimum and maximum adjustable 0-99 (parameters 11 and 12, default 10 and 99) - or at the wall with bottom 5x \/ top 5x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eRamp Rates\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eOn\/off fade 1-10 s (parameter 9, default 2 s) | dimming fade 1-10 s (parameter 10, default 4 s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eTimers\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eAuto turn-off and auto turn-on, 1-65535 minutes (parameters 4 and 6, disabled by default)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eConfiguration Parameters\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003e9 total - 1, 2, 4, 6, 8, 9, 10, 11, 12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eLED Indicator\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eSolid blue = dimmer status, behavior set by parameter 2 | blue flashing = inclusion or exclusion | green 2 s = success, red 2 s = failed | green 3x = setting saved, red 3x = failed | orange flashing = min\/max brightness mode | purple = factory reset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"versa-group\" colspan=\"2\" style=\"background-color: #0d1d41 !important; color: #ffffff !important;\"\u003eOperating Conditions\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003e32 to 104 deg F (0 to 40 deg C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eUse\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eIndoor - dry locations only, lighting loads only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eMarket\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eUS (125VAC) | sold in the United States only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eWarranty\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003e2 years from the original date of consumer purchase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"versa-group\" colspan=\"2\" style=\"background-color: #0d1d41 !important; color: #ffffff !important;\"\u003eCertifications \u0026amp; Compliance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eSafety Listing\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eETL Listed by Intertek - UL 60730-1:2016 (automatic electrical controls) | Intertek control no. 5030071\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eFCC\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eFCC Part 15 Class B | FCC ID: 2AD9XDIM-ZW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eRF Exposure\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eComplies with FCC uncontrolled-environment limits - install with 20 cm minimum separation from any person\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"versa-label\"\u003eZ-Wave Alliance\u003c\/td\u003e\n\u003ctd class=\"versa-value\"\u003eZ-Wave Plus certified - Z-Wave 800 LR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp class=\"versa-foot\"\u003eTurn off the breaker before installation and verify with a non-contact voltage tester. Install per the National Electrical Code and local regulations; where required by code, installation must be performed by a qualified, licensed electrician. Lighting loads only - do not use to control fans, receptacles, tube or fluorescent fixtures, transformer-supplied fixtures, heat lamps, sun lamps, medical or life-support equipment, electric heaters, or any appliance where unintended operation could create an unsafe condition. Indoor use only in dry locations.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vw-panel vw-p3\"\u003e\n\u003cp\u003eThe DIM-ZW works with all Z-Wave certified controllers. Versa officially lists 2GIG EDGE, Qolsys IQ, SmartThings, Hubitat, and Home Assistant (with a Z-Wave 800 controller). To use Z-Wave Long Range, pair it to an 800 Series Long Range controller using SmartStart: scan the DSK QR code on the front of the device with your controller app and the dimmer joins automatically within 10 minutes using S2 security. Long Range inclusion is by SmartStart only, on an 800 Series controller with Long Range enabled. For classic mesh inclusion, set the controller to add a device and press the top paddle three times quickly.\u003c\/p\u003e\n\u003cp class=\"vw-related\"\u003e\u003cstrong\u003eDocumentation:\u003c\/strong\u003e DIM-ZW installation manual (\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0524\/5513\/files\/DIM-ZW_Installation_Instruction_Manual.pdf?v=1787334168\" rel=\"noopener\" style=\"color: #1565c0;\" target=\"_blank\"\u003ePDF\u003c\/a\u003e) and the \u003ca href=\"https:\/\/versawireless.com\/blogs\/installation-manuals\/dim-zw-installation-manual\" style=\"color: #1565c0;\"\u003eDIM-ZW installation manual web page\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp class=\"vw-related\"\u003e\u003cstrong\u003eAlso in the Versa Z-Wave 800 line:\u003c\/strong\u003e the \u003ca href=\"https:\/\/versawireless.com\/products\/lamp-zw2\" style=\"color: #1565c0;\"\u003eLAMP-ZW2 plug-in dimmer\u003c\/a\u003e covers lamps and portable fixtures on the same 800 LR radio, for locations without a wall box.\u003c\/p\u003e\n\u003csection class=\"vw-faq\" style=\"margin-top: 32px;\"\u003e\n\u003ch2 id=\"dimzw-faq-heading\" style=\"font-size: 19px; line-height: 26px; font-weight: 600; margin: 0 0 14px; color: #081f3f !important;\"\u003eDIM-ZW questions installers ask\u003c\/h2\u003e\n\u003ch3 style=\"font-size: 16px; line-height: 22px; font-weight: 700; margin: 20px 0 6px; color: #081f3f !important;\"\u003eDoes the DIM-ZW require a neutral wire?\u003c\/h3\u003e\n\u003cp\u003eYes. The DIM-ZW is a neutral-required in-wall dimmer switch - line, load, neutral, and ground all land on the device, plus a traveler in a 3-way install. There is no no-neutral mode. Line and load are not interchangeable, and the terminals accept 14 AWG copper conductors only. Confirm the box has a neutral before you specify the device for that location.\u003c\/p\u003e\n\u003ch3 style=\"font-size: 16px; line-height: 22px; font-weight: 700; margin: 20px 0 6px; color: #081f3f !important;\"\u003eCan the DIM-ZW be used in a 3-way circuit?\u003c\/h3\u003e\n\u003cp\u003eYes, with one rule: the DIM-ZW must be installed in the box that has the direct connection to power, and the companion must be a standard mechanical 3-way switch - not another smart switch, not another dimmer, and not an add-on. The DIM-ZW's LOAD terminal feeds the light directly. The companion gets two wires only: neutral on its COMMON screw and the red traveler on a traveler screw. If the existing wiring does not match that arrangement, stop and consult an electrician.\u003c\/p\u003e\n\u003ch3 style=\"font-size: 16px; line-height: 22px; font-weight: 700; margin: 20px 0 6px; color: #081f3f !important;\"\u003eDoes the DIM-ZW work with dimmable LED bulbs?\u003c\/h3\u003e\n\u003cp\u003eYes. As an LED dimmer switch it carries up to 300W of dimmable LED or CFL, and up to 600W of incandescent or halogen. In a multi-gang box, derate incandescent to 500W in a 2-gang and 400W in a 3-gang to account for heat. Use bulbs marked dimmable - a dimmable rating on the lamp is what lets the DIM-ZW hold a smooth curve at the low end. Lighting loads only: the DIM-ZW is not rated for fans, receptacles, tube or fluorescent fixtures, transformer-supplied fixtures, heat lamps, or sun lamps.\u003c\/p\u003e\n\u003ch3 style=\"font-size: 16px; line-height: 22px; font-weight: 700; margin: 20px 0 6px; color: #081f3f !important;\"\u003eMy LEDs flicker or buzz at the low end. Can I fix that at the dimmer?\u003c\/h3\u003e\n\u003cp\u003eYes - raise the minimum brightness. From the hub, set parameter 11 (minimum, 0-99, default 10) and parameter 12 (maximum, default 99). At the wall, press the bottom paddle 5x quickly: the LED flashes orange slowly and the light drops to the current minimum, then hold the top or bottom paddle to adjust and press the bottom paddle 5x again to confirm - green flashes 3x when it saves. The top paddle 5x sets maximum the same way. Ten seconds without input exits without saving. Ramp rates are separate: parameter 9 for the on\/off fade and parameter 10 for the dimming fade, each 1-10 seconds.\u003c\/p\u003e\n\u003ch3 style=\"font-size: 16px; line-height: 22px; font-weight: 700; margin: 20px 0 6px; color: #081f3f !important;\"\u003eHow far does the DIM-ZW reach on Z-Wave Long Range?\u003c\/h3\u003e\n\u003cp\u003eUp to 1,300 ft line-of-sight direct to the controller on Long Range, and about 330 ft (100 m) per hop on classic mesh. Z-Wave Long Range uses a star topology, so the 1,300 ft figure is a point-to-point link to the controller rather than a hop through the mesh, and Z-Wave Long Range devices transmit at up to +20 dBm against -1 dBm for classic Z-Wave. The DIM-ZW also contains an always-on repeater, which is a separate classic-mesh function that strengthens the network for other mains-powered nodes and carries no range figure of its own.\u003c\/p\u003e\n\u003ch3 style=\"font-size: 16px; line-height: 22px; font-weight: 700; margin: 20px 0 6px; color: #081f3f !important;\"\u003eDoes device-to-device association work when the DIM-ZW is on Long Range?\u003c\/h3\u003e\n\u003cp\u003eAssociation group 2 sends a Basic Set ON\/OFF to up to 5 nodes on a local paddle press, and that direct device-to-device path runs on a classic mesh network. A node included via Z-Wave Long Range communicates with the Primary Controller, so on LR the same behavior is built as a hub automation triggered by the paddle. Configuration parameters are unaffected on either mode, because a parameter write is a controller-to-node singlecast. Choose mesh inclusion when you want the dimmer to drive another device with the hub offline; choose Long Range when distance to the controller is the constraint.\u003c\/p\u003e\n\u003ch3 style=\"font-size: 16px; line-height: 22px; font-weight: 700; margin: 20px 0 6px; color: #081f3f !important;\"\u003eDoes the DIM-ZW support scenes from the paddle?\u003c\/h3\u003e\n\u003cp\u003eYes. Central Scene is supported on a double-tap of either paddle: top 2x sends Scene 1 and bottom 2x sends Scene 2, so a single wall location can trigger hub automations without touching the load it controls.\u003c\/p\u003e\n\u003ch3 style=\"font-size: 16px; line-height: 22px; font-weight: 700; margin: 20px 0 6px; color: #081f3f !important;\"\u003eWhat is the difference between the DIM-ZW and the LAMP-ZW2?\u003c\/h3\u003e\n\u003cp\u003eBoth are Versa Z-Wave 800 Long Range dimmers on the same radio. The DIM-ZW is an in-wall dimmer switch: it is wired into a single-gang box on a single-pole or 3-way circuit and dims the hardwired fixture, up to 600W incandescent or 300W dimmable LED. The \u003ca href=\"https:\/\/versawireless.com\/products\/lamp-zw2\" style=\"color: #1565c0;\"\u003eLAMP-ZW2\u003c\/a\u003e is a plug-in dimmer that sits between an outlet and a lamp, for portable fixtures and locations where no wiring change is wanted.\u003c\/p\u003e\n\u003ch3 style=\"font-size: 16px; line-height: 22px; font-weight: 700; margin: 20px 0 6px; color: #081f3f !important;\"\u003eHow do I change a bulb safely without shutting off the breaker?\u003c\/h3\u003e\n\u003cp\u003ePull the air-gap tab at the bottom of the paddle out. That mechanically cuts power to the dimmer and the fixture for the bulb change; push it back in to restore normal operation. For installation or removal of the dimmer itself, always turn off the breaker and verify with a non-contact voltage tester.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"vw-buy\" style=\"margin-top: 32px;\"\u003e\n\u003ch2 id=\"dimzw-buy-heading\" style=\"font-size: 19px; line-height: 26px; font-weight: 600; margin: 0 0 14px; color: #081f3f !important;\"\u003eWhere to buy the DIM-ZW\u003c\/h2\u003e\n\u003cul class=\"vw-list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDealers and distributors:\u003c\/strong\u003e DIM-ZW distribution is being set up now - \u003ca href=\"https:\/\/versawireless.com\/pages\/contact\" style=\"color: #1565c0;\"\u003econtact Versa\u003c\/a\u003e for availability and to be notified when it ships.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDealer pricing tiers:\u003c\/strong\u003e \u003ca href=\"https:\/\/versawireless.com\/pages\/wholesale-registration-form\" style=\"color: #1565c0;\"\u003eopen a Versa wholesale account\u003c\/a\u003e for volume pricing across the sensor and Z-Wave line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelated:\u003c\/strong\u003e see the full \u003ca href=\"https:\/\/versawireless.com\/collections\/z-wave\" style=\"color: #1565c0;\"\u003eZ-Wave 800 range\u003c\/a\u003e, or \u003ca href=\"https:\/\/versawireless.com\/pages\/5-free-sensors\" style=\"color: #1565c0;\"\u003erequest 5 free Versa sensors\u003c\/a\u003e for your next install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Versa Wireless","offers":[{"title":"Default Title","offer_id":48173825622181,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/5513\/files\/DIM-ZW1.png?v=1787593096","url":"https:\/\/versawireless.com\/products\/dim-zw","provider":"Versa Wireless","version":"1.0","type":"link"}