GNPC-1 Google Nest Power Adapter
Versa
The GNPC-1 is a professional-grade power adapter for wired Google Nest Cam models that take a 7.5V DC input. It's an ETL-listed Class 2 supply built for installers: where it pulls ahead of the bundled brick is the run — up to 75 ft on 18 AWG, roughly three times the length of typical aftermarket adapters, so you can put the transformer where the outlet is and run clean, concealed cable to the camera.
An integrated security mounting screw hole anchors the adapter flat to the wall plate so it can't be unplugged or walked off on a commercial job. Automatic short-circuit protection self-recovers once a fault clears, and NTC temperature components limit inrush and prevent overheating.
Key Features
- Powers wired Google Nest Cam models requiring 7.5V DC / 1.5A
- Up to 75 ft cable run on 18 AWG — about 3× the reach of typical aftermarket adapters; clean concealed runs to ceiling, soffit, or wall
- Integrated security mounting screw hole — anti-tamper; anchors the adapter to the wall plate
- Automatic short-circuit protection — self-recovers once the fault is cleared
- NTC temperature protection — limits inrush current and prevents overheating
- Class 2 power supply · 100–240V AC universal input
- ETL Listed by Intertek — UL 1310 · CSA C22.2 No. 223 (Class II indoor-use transformers)
- Indoor use — residential & commercial
Specifications
GNPC-1 Specifications
Google Nest Cam Power Transformer
| Electrical | |
|---|---|
| Input | 100–240V AC, 50/60Hz, 0.5A |
| Output | 7.5V DC, 1.5A |
| Class | Class 2 power supply |
| Compatibility | |
| Application | Replacement power transformer for wired Google Nest Cam models requiring 7.5V DC input |
| Replacement Type | One-for-one OEM-spec replacement for the standard Nest Cam power brick |
| Wire & Run | |
| Cable Run | Up to 75 ft (22.9 m) |
| Wire Gauge | Supports 18 AWG conductor |
| Physical | |
| Dimensions (L × W × H) | 1.71" × 1.15" × 3.75" |
| Plug Type | Two-prong plug-in (NEMA 1-15P) |
| Mounting | Integrated security mounting screw hole Anti-Tamper |
| Protection | |
| Short-Circuit Protection | Automatic shutdown on output fault — self-recovers once the fault is cleared |
| Temperature Protection | NTC (Negative Temperature Coefficient) components limit inrush current and prevent overheating |
| Operating Conditions | |
| Use | Indoor only — residential & commercial |
| Certifications & Compliance | |
| Safety Listing | ETL Listed by Intertek |
| Standards | UL 1310 · CSA C22.2 No. 223 (Class II indoor-use transformers) |
Confirm your camera's required input voltage before installation. The GNPC-1 outputs 7.5V DC and is intended for Google Nest Cam models that accept 7.5V input — do not use with Nest Cam Battery, Nest Doorbell, or other Nest models requiring a different voltage. Indoor use only.
Compatibility
The GNPC-1 is a 7.5V DC, 1.5A power transformer for wired Google Nest Cam models that accept a 7.5V input. Confirm your camera's required input voltage before ordering — it is not intended for Nest Cam Battery, Nest Doorbell, or other models that require a different voltage. Available for dealer and distributor purchase at wave-electronics.com.
