Installer Guide
One switch-selectable motion detector covers Qolsys, Interlogix, Honeywell, and 2GIG.
Most motion detectors lock you into one panel ecosystem, so a service tech ends up carrying two or three PIRs just to be ready for whatever's on the wall. The Versa PIR-DUAL is a dual-element motion detector with a switch-selectable radio — flip it to 319.5 MHz for Qolsys and GE/Interlogix, or 345 MHz for Honeywell 5800 and 2GIG. This guide shows the two enrollment paths side by side: a Qolsys IQ Panel 4 on 319.5 MHz, and a Resideo PROA7/PROA7PLUS on 345 MHz.
One detector instead of a truck full of brands
Residential alarm sensors are split across a handful of sub-GHz frequencies, and the frequency — not the brand badge — is what decides whether a sensor will enroll. The two that cover the bulk of North American residential jobs are 319.5 MHz and 345 MHz. The PIR-DUAL speaks both, so the same box works whether you walk into a Qolsys account or a Honeywell takeover.
| PIR-DUAL Setting | Frequency | Panels It Covers |
|---|---|---|
| Switch ON | 319.5 MHz | Qolsys IQ Panel 2+ / IQ Panel 4 (with 319.5 RF card), GE/Interlogix receivers |
| Switch OFF | 345 MHz | Honeywell VISTA (5800-series RF), 2GIG GC2/GC3/EDGE, Resideo PROA7/PROA7PLUS (with PROTAKEOVER) |
For a stocking dealer, that's the difference between one line item and three. For a service tech, it means a single motion on the van handles a Qolsys callback in the morning and a VISTA takeover in the afternoon — set the switch to match the panel and enroll.
PIR-DUAL specifications
| Spec | Value |
|---|---|
| Sensor type | Dual-element passive infrared (PIR) |
| Frequency | 319.5 MHz or 345 MHz (switch-selectable) |
| Panel compatibility | Honeywell, 2GIG, Qolsys, Interlogix |
| Detection range | 40 ft facing the sensor; 40 ft at 45° |
| Pet immunity | Up to 60 lb |
| Sensitivity | Selectable — normal or high |
| Battery | 1 × CR123A 3 V lithium (replaceable) |
| Battery life | 5 years (typical) |
| Tamper | Cover and wall tamper |
| Mounting height | 7.5 ft or 10 ft |
| Operating temperature | 32–122 °F (0–50 °C) |
| Dimensions | 2.9 × 2.4 × 1.7 in (H × W × D) |
| Supervision | Supervisory signal; millions of unique ID codes |
| Regulatory | FCC Part 15 Class B; IC (ISED Canada) |
Qolsys IQ Panel 4 — 319.5 MHz
What you need
- Qolsys IQ Panel 4 (or IQ Panel 2+) with the 319.5 MHz RF daughter card installed
- Installer code (default
1111) or Dealer code (default2222) - PIR-DUAL set to 319.5 MHz (frequency switch ON)
- One CR123A battery
Open the Auto Learn screen
On the IQ Panel 4 touchscreen, swipe down and tap Settings → Advanced Settings, enter your installer or dealer code, then go to Installation → Devices → Security Sensors → Auto Learn Sensor.
Trip the PIR-DUAL to enroll
With the panel in Auto Learn, insert the battery (or open and close the cover tamper) on the PIR-DUAL. The panel chimes and displays the sensor's DL ID. Tap OK to confirm.
Confirm the source
The IQ Panel 4 auto-detects the incoming signal and sets the Source field for you. Because the PIR-DUAL transmits as a standard 319.5 MHz device (not an encrypted S-Line sensor), the Source reads 319 MHz. On 319.5 MHz there is no Loop field to set — a Loop number only appears for 345 MHz sensors on this panel.
Set sensor type and group
Choose Sensor Type: Motion, then pick the Sensor Group that matches the arming behavior you want. Group 17 — "Away-Instant Motion" is the usual choice for an interior PIR: it's active in Away and Night, trips instantly on motion, and won't trip if an entry/exit sensor is faulted first (interior-follower behavior).
Name it and add
Set the Sensor Name, Chime, and Voice Prompts from the drop-downs, then tap Add New to save the zone.
Resideo PROA7 / PROA7PLUS — 345 MHz
What you need
- PROA7 or PROA7PLUS control panel
- PROTAKEOVER wireless converter module, rotary switch set to position 0 (5800 Series)
- Installer code (default
4112) - PIR-DUAL set to 345 MHz (frequency switch OFF)
Enter local programming
On the panel home screen, tap the Menu icon, select Tools, enter the installer code (default 4112), then open Programming.
Add a sensor
Go to the sensors/zones list and tap Add Sensor (the + in the upper-right). The panel drops into learn mode and prompts you to trip the device to pair.
Select sensor type: 5800 or Takeover
For a sensor coming in through the PROTAKEOVER module, choose the 5800 or Takeover sensor type. This tells the panel to expect a legacy transmitter rather than a PROSiX device.
Learn the serial number
Tap Learn, then trip the PIR-DUAL (insert the battery or open/close the cover) so the panel captures its serial number. You can also pick Add Manually and key in the serial — the panel accepts up to 7 digits.
Set zone, loop, and response
Accept the zone number (it defaults to the first open zone). For a 5800-style motion, set Loop 1, then choose a Device/Response type appropriate for an interior motion — an interior-follower response is the typical choice so the detector is bypassed automatically during entry/exit.
Name and save
Assign a zone descriptor (e.g., Living Room Motion) and save. You can also program the panel through AlarmNet 360 if you manage the account remotely. Run a walk-test to confirm coverage before mounting.
Quick reference: PIR-DUAL by panel
| Panel | Set PIR-DUAL To | Enrollment Method | Requirement |
|---|---|---|---|
| Qolsys IQ Panel 4 / 2+ | 319.5 MHz (ON) | Touchscreen — Auto Learn Sensor | 319.5 MHz RF daughter card Card Required |
| Resideo PROA7 / PROA7PLUS | 345 MHz (OFF) | Local Programming — Add Sensor | PROTAKEOVER module, rotary = 0 Module Required |
| Honeywell VISTA (5800) | 345 MHz (OFF) | Keypad — *56 Zone Programming | 5800-series RF receiver Receiver |
| 2GIG GC2 / GC3 / EDGE | 345 MHz (OFF) | Installer Toolbox — Wireless Zones | None — built-in 345 MHz Native |
Frequency compatibility for VISTA and 2GIG follows the PIR-DUAL's 345 MHz setting; for the full keypad and Installer Toolbox sequences on those panels, see our Versa sensor panel compatibility guide.
Pet immunity and false-alarm rejection
The PIR-DUAL uses two pyroelectric elements that alternate in polarity behind a precision multi-zone Fresnel lens. The lens splits the protected area into alternating detection zones, and a digital signal-processing engine only declares an alarm when it sees a qualified sequence of polarity changes — the signature of a person crossing the field of view. Drafts, sunlight through a window, and a dog crossing the floor don't produce that sequence, which is how the detector stays immune to pets up to 60 lb while still catching an intruder.
Aim matters: people are detected best moving across the coverage pattern, not straight at the sensor. Mount it 7.5 ft or 10 ft up, keep windows, vents, and heat sources out of the field of view, and position it so a likely path crosses the zones. Use high sensitivity where someone might only cross a short distance in view; normal sensitivity suits most rooms.
About the PIR-DUAL
The Versa Wireless PIR-DUAL is a wireless dual-element PIR motion detector for residential and light-commercial security. It runs on a single CR123A lithium battery for about five years, reports cover and wall tamper, and sends a supervisory check-in so the panel knows it's alive. If you only service 319.5 MHz Qolsys and Interlogix systems, the single-frequency PIR-319 covers that lane; the PIR-DUAL is for the mixed-panel reality most dealers actually live in. Browse the full lineup on the motion detectors collection.
One switch-selectable PIR for Qolsys, Interlogix, Honeywell and 2GIG installs.
Frequently asked questions
Can one motion detector work on both Qolsys and Honeywell panels?
Yes. The PIR-DUAL has a frequency switch — set it to 319.5 MHz for Qolsys and GE/Interlogix, or 345 MHz for Honeywell 5800 and 2GIG. One SKU covers both ecosystems, so you carry a single motion detector instead of a different model for each brand.
Do I need anything extra to use the PIR-DUAL on a Qolsys IQ Panel 4?
The panel must have the 319.5 MHz RF daughter card installed. The IQ Panel 4 supports PowerG plus one legacy frequency (319.5, 345, or 433 MHz) depending on the card it shipped with — a 319.5 sensor only enrolls on a 319.5-equipped panel. Set the PIR-DUAL to 319.5 MHz (switch ON) and use Auto Learn Sensor.
How do I enroll the PIR-DUAL on a Resideo PROA7?
Set the PIR-DUAL to 345 MHz (switch OFF). The PROA7/PROA7PLUS needs the PROTAKEOVER module with its rotary switch on 0 (5800 Series). In Local Programming (Tools → installer code 4112 → Programming), choose Add Sensor, pick the "5800 or Takeover" type, learn the serial by tripping the sensor, set Loop 1, and assign an interior-follower response. PROTAKEOVER runs alongside the panel's built-in PROSiX sensors.
Is the PIR-DUAL pet immune?
Yes — up to 60 lb. Two pyroelectric elements and a digital signal-processing engine require a qualified sequence of polarity changes to declare an alarm, which rejects drafts, sunlight, and pets while still detecting a person crossing the coverage area.
What battery does the PIR-DUAL use and how long does it last?
One CR123A 3 V lithium battery, with about a 5-year typical life. The detector supervises itself and sends a low-battery report to the panel, so you get advance warning before it dies.
