Skip to content
5 Free Security Sensors for Dealers | Versa Wireless

For Security Dealers

Try 5 Versa sensors free on your next install.

Versa Wireless gives active security dealers 5 free wireless sensors to put on a real install — no cost and no commitment. Pick the sensors you need, fill out the form, and a Versa rep verifies your dealer account and ships your samples.

  • 5 sensors, on us. Your choice of Versa door/window contacts, shock, or motion sensors — free to qualified dealers.
  • No purchase, no contract. These are working samples so you can test Versa on a job before you ever place an order.
  • Built for the panels you install. Qolsys IQ, Honeywell/Resideo, GE/Interlogix, DSC, and Alarm.com — covered.
  • Backed by 25 years of OEM sensor design. The same engineers who built sensors for the biggest names in security now build under their own name.

Claim your 5 free sensors

Dealers only. A Versa rep will verify your account and arrange your samples.

No cost. No purchase necessary. Offer for active dealers in the US & Canada.

How the free sensor offer works

STEP 1

Tell us who you are

Fill out the form with your name, company, work email, and phone. It takes about 30 seconds — no account or password required.

STEP 2

We verify your dealer account

A Versa rep confirms you're an active security dealer, installer, or integrator. This keeps the offer for the pros it's meant for.

STEP 3

We ship your 5 free sensors

Once you're verified, your samples go out so you can test them on your next install. Like them? Reorders run through your WAVE Electronics account.

Choose the sensors that fit your panels

Versa builds professional wireless sensors across the 319.5 MHz, 345 MHz, and 433 MHz worlds, plus Z-Wave 800. Mix and match any five from the lineup below — every one is engineered to install cleaner and run longer than what you're using now.

SensorType & frequencyWorks with
MINI-319 Door/window contact — 319.5 MHz Qolsys IQ (319.5 MHz card), GE/Interlogix
MINI-345 Door/window contact — 345 MHz Honeywell/Resideo — direct 5800MINI replacement
MINI-433 Door/window contact — 433 MHz DSC PowerSeries 1832/1864, Impassa, Alexor
SHOCK-319 Contact + shock/impact — 319.5 MHz Qolsys IQ (319.5 MHz card), GE/Interlogix
PIR-319 PIR motion detector — 319.5 MHz Qolsys IQ (319.5 MHz card), GE/Interlogix
PIR-DUAL PIR motion detector — 319.5 + 345 MHz Qolsys IQ and Honeywell/Resideo (one SKU, both)
LAMP-ZW2 Plug-in dimmer — Z-Wave 800 Long Range Alarm.com approved Z-Wave controllers

Not sure which to request? Browse the full door & window sensors, motion detectors, shock sensors, and full catalog, then tell your rep what you want to test.

Why dealers test Versa

25 years of OEM design

Versa's founders engineered sensors for the largest names in residential and commercial security for two decades. Read the story.

Bluefield at the door

A placement LED confirms magnet range, signal, and battery right at the frame — no walk back to the panel. How it works.

Stocked through WAVE

Once you've tested the samples, reorders ship through your existing WAVE Electronics account.

Small footprint, full range. Versa contacts measure about 2.2" × 1" × 0.25" — roughly a quarter-inch deep so they disappear on a frame — while holding range and battery life that match sensors twice their size.

Frequently asked questions

Is the Versa 5-free-sensors offer really free?

Yes. Qualified security dealers receive 5 Versa wireless sensors at no cost, with no purchase or commitment. Submit the form, a Versa rep verifies your dealer account, and your samples ship out.

Who qualifies for 5 free Versa sensors?

The offer is for active security dealers, alarm installers, and integrators in the US and Canada. A Versa rep verifies your business before shipping — it isn't a consumer promotion.

Which sensors can I choose from?

Pick any five from the 319.5 MHz MINI-319, the 345 MHz MINI-345 (a direct 5800MINI replacement), the 433 MHz MINI-433, the SHOCK-319 contact-plus-shock sensor, the PIR-319 and dual-frequency PIR-DUAL motion detectors, and the Z-Wave 800 LAMP-ZW2 plug-in dimmer.

What alarm panels do Versa sensors work with?

Versa covers the major ecosystems: Qolsys IQ Panel 4 and 2+ (319.5 MHz, with the SRF card installed), Honeywell/Resideo 345 MHz panels, GE/Interlogix, and DSC PowerSeries 1832/1864, Impassa, and Alexor on 433 MHz. The LAMP-ZW2 is Alarm.com approved.

Do I have to buy anything or sign a contract?

No. There's no purchase necessary and no commitment. The free sensors are samples so you can test Versa on a real install; reorders go through your WAVE Electronics account.

Ready to put Versa on your next install?

Claim your 5 free sensors above, or browse the full lineup first.

Browse the catalog →
Cart 0

Your cart is currently empty.

Start Shopping